Straight Ram Hydraulic Beam Press with Dual Power Tables - Model SR150
Compact Production Footprint + Powerful Tonnage = Optimal Manufacturing Efficiency
General Specifications
Country of Manufacture – USA Press Driving Mechanism – Hydraulics Cutting Force – 150 U.S. Tons Head & Bed Size – 40” D x 40” W Cutting Stroke - 8” Daylight Opening – 10”, without cutting surface Stroke Control – Controlled by Linear Transducer which allows the die height to be adjusted infinitely in increments of 0.001”
|
Sheet Feed System
Dual Power Tables – Heavy Duty steel tables.
Tables will be designed so that customer cutting tool can be placed on the table to be placed under the cutting head for bolting the tool to the cutting head.
Table will be capable of holding up to 2,500lb tool.
Dual Power Tables – Heavy Duty steel tables.
Tables will be designed so that customer cutting tool can be placed on the table to be placed under the cutting head for bolting the tool to the cutting head.
Table will be capable of holding up to 2,500lb tool.
Cutting Surface
– Nylon cutting pad on each table.
- Oscillating Pad Shifter
- Designed to incrementally move the cutting pad after each stroke to prevent the cutting die from cutting into the same location on the pad after each stroke. One pad shifter to be installed on each table (2 shifters TOTAL)
-Will drastically increase the life of the cutting surface
-Material alignment brackets will be mounted so that they are not affected by the pad oscillating to ensure that the material
aligns with the die before being cut
Stroke Control – Controlled by Linear Transducer which allows the die height to be adjusted infinitely in increments of 0.001”
– Nylon cutting pad on each table.
- Oscillating Pad Shifter
- Designed to incrementally move the cutting pad after each stroke to prevent the cutting die from cutting into the same location on the pad after each stroke. One pad shifter to be installed on each table (2 shifters TOTAL)
-Will drastically increase the life of the cutting surface
-Material alignment brackets will be mounted so that they are not affected by the pad oscillating to ensure that the material
aligns with the die before being cut
Stroke Control – Controlled by Linear Transducer which allows the die height to be adjusted infinitely in increments of 0.001”