SCHWABE USA Die Cutting Presses - Hydraulic Beam Press
SCHWABE Hydraulic Beam Press Capabilities
- Cut Roll or Sheet Goods
- Handles Large Die Boards with Large Amounts of Rule
- Kiss Cutting Capabilities Through Mechanical Stops
- Feed Systems – Roll Feed, Clamp Feed, Single & Dual Sliding Tables,
- Manual & Powered Tables, Progressive Die Cutting, Vacuum Die Cutting
- Matching deflection between Head and Bed of hydraulic press
- Eliminates the need for complex balancing systems.
- No more than 5 moving parts in the SR design
- No Linkage involvement, means less scheduled maintenance and less spare parts inventory.
- Schwabe SR hydraulic system is freestanding for easy access for maintenance.
Used with a large die board with hand placed tools for cutting a single ply of material or multiple layers of material. Index feed accuracy up to 1/32" for precise cutting. Press can feed die boards and material from both sides of the press increasing throughput and productivity.
Over 20 die boards with material can be cycled through the press per hour. The tool could also be head mounted and the press operates as an automatic progressive feed press, again with extremely tight index tolerances can be achievable. Tonnages available begin at 150 tons up to 600 tons of cutting force; whatever is required for your material can be designed and built by Schwabe. |
Benefits of choosing a SCHWABE USA Straight Ram Beam Press
1. OEM manufactured by SCHWABE USA in Cincinnati, Ohio, USA, providing quality assurance and superior long term performance AND 100% OSHA compliant.
2. The hydraulic cylinder placement, when used on a solid platen, tends to elastically match the deflection of the table bed rather than the separation that will occur with pull down (4 Post) press designs.
The Schwabe Straight Ram SR Series design allows for full tonnage over the entire stroke of the platen.
3. Side die loading is a unique option with this design while providing fast die changeover benefits typically less than 3 minutes.
4. The press dimensions can be customized without affecting the action of the press. This is because the platen guiding and cylinder mounting are centralized in the top structure. The Press dimensions start at 32” Deep x 64” Wide and are available up to 60″ x 80″ or larger
5. The bed height can be lower than pull down or base linkage presses since the beds only function is to provide a flat stiff structure, working height is ergonomically friendly at 36” ( 900mm)
6. The press structure is simple and has only three moving parts namely: platen, center guide, and hydraulic cylinder rods. Because of this design simplicity the maintenance of the press itself is limited to lubrication. No linkage movement, no bushing, bearings etc. hidden inside the press weldment which are expensive to repair, maintain, replace.
The Schwabe Straight Ram SR Series Press begins at 115 Tons of cutting force and is available up to 2,500 Tons of cutting force or more.
7. The unique Schwabe SR Series Press design makes it easy to incorporate all types of material infeed and outfeed systems, excellent for cutting roll or sheet materials.
8. Hydraulic cylinders are removable from the open structure of the top piece not hidden in a table bed structure. Rod seals can be changed without removing the cylinders in most designs.
Hydraulics featuring Rex Roth Cylinders, Valves, Pumps, free standing power unit allows easy access for maintenance.
9. Allen Bradley controls standard; Siemens optional
10. The SR can be fitted with various positive stop configurations: table, platen, and overhead mounted stops. The over head stops are especially suited for side die loading applications. Positive Stops are used when cutting against a belt or steel for kiss-cutting applications.
1. OEM manufactured by SCHWABE USA in Cincinnati, Ohio, USA, providing quality assurance and superior long term performance AND 100% OSHA compliant.
2. The hydraulic cylinder placement, when used on a solid platen, tends to elastically match the deflection of the table bed rather than the separation that will occur with pull down (4 Post) press designs.
The Schwabe Straight Ram SR Series design allows for full tonnage over the entire stroke of the platen.
3. Side die loading is a unique option with this design while providing fast die changeover benefits typically less than 3 minutes.
4. The press dimensions can be customized without affecting the action of the press. This is because the platen guiding and cylinder mounting are centralized in the top structure. The Press dimensions start at 32” Deep x 64” Wide and are available up to 60″ x 80″ or larger
5. The bed height can be lower than pull down or base linkage presses since the beds only function is to provide a flat stiff structure, working height is ergonomically friendly at 36” ( 900mm)
6. The press structure is simple and has only three moving parts namely: platen, center guide, and hydraulic cylinder rods. Because of this design simplicity the maintenance of the press itself is limited to lubrication. No linkage movement, no bushing, bearings etc. hidden inside the press weldment which are expensive to repair, maintain, replace.
The Schwabe Straight Ram SR Series Press begins at 115 Tons of cutting force and is available up to 2,500 Tons of cutting force or more.
7. The unique Schwabe SR Series Press design makes it easy to incorporate all types of material infeed and outfeed systems, excellent for cutting roll or sheet materials.
8. Hydraulic cylinders are removable from the open structure of the top piece not hidden in a table bed structure. Rod seals can be changed without removing the cylinders in most designs.
Hydraulics featuring Rex Roth Cylinders, Valves, Pumps, free standing power unit allows easy access for maintenance.
9. Allen Bradley controls standard; Siemens optional
10. The SR can be fitted with various positive stop configurations: table, platen, and overhead mounted stops. The over head stops are especially suited for side die loading applications. Positive Stops are used when cutting against a belt or steel for kiss-cutting applications.