Die Cut Heat Seal Parts on SCHWABE Presses with Electrically Heated Platens
Freeman Schwabe offers a broad range of Heated Platen Cutting Presses including
|
Straight Ram Hydraulic Beam Press SR 230 with Electrically Heated Platen
- Auto Interior Parts
- Auto Interior Parts
Schwabe StraIght Ram Hydraulic Beam Press, Model SR 230 with 230 US tons of cutting force with electrically heated platen and Infeed and Outfeed pinch roll feed system with pneumatically operated die rails cutting against a Nylon Pad or Hardened ground steel plate.
This heated platen comes equipped with separate control panel with four heating zones.
Standard feature include programmable dwell time (up to 2 minutes or longer depending on the application requirements). The recipe for each program or job is saved in the HMI for future recall. Programmable tonnage is also an Option.
The SCHWABE USA Straight Ram Hydraulic Beam Press can use top heat, bottom heat or both depending upon your application or your customer’s requirement.
SCHWABE Hydraulic Presses with heated platen are designed, engineered & assembled in Cincinnati, Ohio USA to meet the needs of your die cut heat seal application.
Press size, tonnage, cycle parameters, dwell time, heat specifications and the level of control software sophistication are all designed to maximize your manufacturing process.
Software control options feature programmable cycle parameters, job/program storage and recipe handling capability. Up to 250 individual recipes can be stored with our standard control package.
Standard feature include programmable dwell time (up to 2 minutes or longer depending on the application requirements). The recipe for each program or job is saved in the HMI for future recall. Programmable tonnage is also an Option.
The SCHWABE USA Straight Ram Hydraulic Beam Press can use top heat, bottom heat or both depending upon your application or your customer’s requirement.
SCHWABE Hydraulic Presses with heated platen are designed, engineered & assembled in Cincinnati, Ohio USA to meet the needs of your die cut heat seal application.
Press size, tonnage, cycle parameters, dwell time, heat specifications and the level of control software sophistication are all designed to maximize your manufacturing process.
Software control options feature programmable cycle parameters, job/program storage and recipe handling capability. Up to 250 individual recipes can be stored with our standard control package.
With electric heated platen option added the Model DG 35 tons with power table, is able to die cut & kiss-cut crease heat seal applications as well as molding & trimming, laminating and embossing.
Full Head Hydraulic Cutting Press with Heated Platen
Heat Seal Operating Temperature
Freeman Schwabe Hydraulic Beam Presses with a Heated Platen have an operating temperature up to 550 degrees F/287 degrees C and includes multiple heating zones. The Heated Platens are generally electrically controlled, but also could be controlled with thermal oil. Usually this is client specific or based upon application requirements. Features include separate control platen and in addition to temperature, dwell and pressure are programmable with parameters saved in the PLC for future recipe recall. |