Envelope Cutting Machine Presses
|
Model EA25 Automatic Envelope Cutting Machine General Specifications Model EA-25
|
Model EA25
Automatic Envelope Cutting Machine
Testimonial:
"Remember that if you ever need a positive testimonial on the EA25, you can count on me. I think it’s a great machine. Side by side, it blows the PHP away". W. Paul Gray, General Manager, Wisco Envelope |
EA-25'S FULLY AUTOMATIC OPERATION AND SPECIAL FEATURES DELIVER HIGH PRODUCTIVITY WITH EASY MAINTENANCE
- The 3-axis servomotor positioning system makes the EA-25 well suited for cutting both non-printed and pre- printed envelope blanks. It can determine irregular cutting positions from a printed layout, then create a cutting program from that layout.
- The X and Y-axis are controlled by a ball screw to ensure accurate positioning of the cutting head.
- CE compliance guarding ensures a totally safe operating environment.
- Extremely rigid frame construction maintains positioning for accurate cutting.
- PC-based control system with user-friendly operator/machine dialogue makes the EA-25 easy to operate.
- Self-diagnostic trouble-shooting pinpoints problems early, reducing downtime
Model EA25 Automatic Envelope Cutting Machine Feed System
Automatic power operated sliding table with pneumatically actuated “lift” holding clamps, mounted on rear of sliding table, set up to operate automatically in conjunction with cutting cycle.
The clamps are individually controlled and can be programmed to retract in order to achieve full material utilization.
Air flotation in lower clamps allows minor adjustment of the paper stack.
Automatic power operated sliding table with pneumatically actuated “lift” holding clamps, mounted on rear of sliding table, set up to operate automatically in conjunction with cutting cycle.
The clamps are individually controlled and can be programmed to retract in order to achieve full material utilization.
Air flotation in lower clamps allows minor adjustment of the paper stack.
|
Cut Part Ejector Ram for EA envelope press.
The poly pro circle comes in 3 different sizes that can be changed out depending on the size of the envelope: Seed Envelopes or Bank Envelopes you will need a very small diameter pp circle, Large FEDEX Style Envelopes the diameter of the pp circle is much larger). |
Die Lubricating Roller for EA Envelope Press
Die Lubricating roller for the Freeman Schwabe Model EA Envelope cutting press machine. |
Cut Part Ejector Ram for EA envelope press.
|
Die Lubricating roller for the Freeman Schwabe Model EA Envelope cutting press machine.
|
Internal production counter is accessed through press computer (“PC”).
- Includes the movable dry run controller, which is used to edit a program for a printed sheet – BIG time saver!
- Material side guides with retractable pneumatic pusher in order to square up “lifts”.
- Pneumatic cut sheet pusher automatically power shifts “lift” with envelopes and waste to side table for easy cut parts picking.
- Die lubricating roller moves across edge of die for improved cut quality and prolonged die life.
- Die lubricating pad for improved cut quality and prolonged die life.
- Pneumatic knock-out unit assists in separating cut envelopes from waste.
- Head mounted pressure plate insures consistent cutting through entire lift of paper and also assist in ejecting envelopes from cutting die. Includes a switch on the main control panel to turn the ejector ‘on’ & ‘off’.
- Pressure roller insures flatness of “lift”(programmable).
- Air cylinders are ISO standard for easy maintenance.
|
Model EM30 & EM25
Semi-Automatic Envelope Cutting Machine Ideal for 4 Corner Dies Cutting Pressure – 27 U.S. Tons or 33 U.S. Tons Head Size –23.6”D x 23.6”W Cutting Stroke – 5.1” Cutting Surface - Polypropylene cutting pad with automatic pad shifter located on the sliding table for added die and pad life. Guarding – Front Type 4 light safety curtain and rear safety guarding. Also includes head safety blocks for working under the head of the press. Frequency converter cushion system for soft stopping ability. Die lubricating roller for improved cut quality and prolonged die life. Adjustable material side guides. Manual Die Rails |
Model EM30 & EM25
Semi-Automatic Envelope Cutting Machine
|
|
Model FH 40
Full Head Press for Cutting Envelopes With Single or Dual Motorized Table Feed System Cutting Force – 44 US Tons Cutting Stroke – 9.8” Daylight – 11.8” does not include cutting surface Main Motor – 5 Hp Machine Bed – 47.2” deep x 63” wide Effective Cutting Area – 45.3” deep x 61” with no die rails or pad shifter
|
Four Corner Envelope Cutting - Model RB30 Receding Head Hydraulic Die Cutting Press
|
General Specifications
Cutting Force – 33 U.S. Tons Machine Bed Size – 35.4 ”D x 47.2” W Effective Cutting Area – 33.5” D x 41.4” W Maximum Receding Distance – 31.5” Cutting Stroke – 7.1” Daylight – 12.8” -Die Blade Height – 3.75” -Stack Height – Max 2.5” |
Controls Panel Control - Allen Bradley PLC and touch screen operator interface controls (menu driven). Includes 250-die memory for recall of feed length, sheet rows, etc., (accessed thru a touch screen).
Press Features
|
|
|
