Die Cutting Presses for Building Materials
Cutting HVAC Fiberglass on a Roll with Belt Clamp Feed System
SCHWABE USA Straight Ram Hydraulic Beam Press Model SR230 Demo shows one layer of HVAC Fiberglass material being cut, please note the press is capable of cutting multiple layers of the HVAC material. General SpecificationsCountry of Manufacture – USA Cutting Force – 230 U.S. Tons Bed Size – 70”W x 75”D Head Size – 71”W x 76”D Die boards are 70”W x 75”D plus up to a half inch on each side. Extra 1” added to the platen to allow for die boards to easily slide into the die rails when in there out most position |
Allen Bradley Compact Logix ControlsPanel Control – Location of the electrical panel to be on the left side of the press form the infeed. Allen Bradley CompactLogix controls which allows die recipe storage, assuming only rolled goods are ran, of 2,600-2,800 (approximately).
Upgraded electrical enclosure to help prevent debris from production material from entering the enclosure. Due to tighter seal of the enclosure, an air conditioning until will be installed on the until opposed to a standard exhaust fan. Includes various production/maintenance reports (screens) menu driven as well as computerized diagnostics with Ethernet capability for telephone diagnostics/trouble-shooting. |
|