Die Cutting Foam / Converting Foam Packaging
Freeman SCHWABE manufactures die cutting presses to convert all types of Foam including Polyether Foam, Polyester Foam, Ethafoam, Volara, Closed & Open Cell Sponge Rubber, Cellulose and Scrubber Foam.
The SCHWABE USA press below is for a Foam Packaging Application with a maximum material thickness of 5″ and some material only 1/2″ thick. The material will be sheet feed manually with the longest sheet being 10′ and multiple sheets will cut at a time.
Freeman SCHWABE manufactures die cutting presses to convert all types of Foam including Polyether Foam, Polyester Foam, Ethafoam, Volara, Closed & Open Cell Sponge Rubber, Cellulose and Scrubber Foam.
The SCHWABE USA press below is for a Foam Packaging Application with a maximum material thickness of 5″ and some material only 1/2″ thick. The material will be sheet feed manually with the longest sheet being 10′ and multiple sheets will cut at a time.
|
|
General Specifications Country of Manufacture – USA Press Driving Mechanism – Hydraulics Cutting Force – 180 U.S. Tons Bed & Platen Size – 50” D x 64” W Cutting Stroke – 9” fully adjustable Daylight Opening – 10” from head to bed without cutting surface Stroke Control – Controlled by linear transducer for accurate positioning of the moving platen. Stroke can be adjusted in increments of 0.001” Side Die Mounting – Pneumatic adjustable die rails in head of press. Die board of both different depths and widths can be installed. Die boards to be loaded from the right side of the machine. |
Feed System
Cutting belt drum driven by a variable frequency drive (VFD)
Approx. 108” outside the infeed guard to allow for largest sheet to be placed and aligned prior to beginning the feed
Single side adjustable material guide for aligning the sheet left/right.
The guide can be mounted either on the left or right hand side of machine and to be confirmed after engineering design.
Cutting belt drum driven by a variable frequency drive (VFD)
Approx. 108” outside the infeed guard to allow for largest sheet to be placed and aligned prior to beginning the feed
Single side adjustable material guide for aligning the sheet left/right.
The guide can be mounted either on the left or right hand side of machine and to be confirmed after engineering design.
Freeman Schwabe's sales and engineering staff have decades of experience in the foam die cutting industry.
If you are cutting 6-inch foam to 1/8-inch foam, we can service your needs.
Our machines can be configured to produce the desired product and look your customer demands.
Material feed systems can handle rolls or sheet format, automatic or manual operations, cutting on belt feed systems, pad cutting or steel against steel.
Our Cutting Presses cut ALL Types of FOAM
Acoustic Foam, Thermal insulation Foam, Filtration foam, Foam Seals & Gaskets, Automotive Interior Trim Parts, Medical Devices and Personal Protection, Household Cleaning Sponges & Scouring Pads, Cosmetics Products, Surgical, Clothing, Furniture, Mattresses & Pillows, Insulation,
|
|
Cutting Foam Planks on Full Head Hydraulic Press with Pinch Roll feed system Model FH - 200
Machine example designed for Die Cutting Foam Planks, with adjustable side guide on In-Feed Belt
|
Full Head Model FH - 200 Pinch Roll In + Out cutting Foam Planks
The following die cutting presses are recommended for the application of cutting Foam and Sponge
