|
CNC 3 Axis Automatic Paper & Envelope Die Cutting Hydraulic Press
Press features:
Freeman Schwabe's EA-25 fully automatic operation and special features deliver high productivity and precision with easy maintenance
The 3-axis servomotor positioning system makes the EA-25 well suited for cutting both non-printed and pre-printed envelope blanks.
The X and Y-axis are controlled by a ball screw to ensure accurate positioning of the cutting head.
Benefits:
CE compliance guarding ensures a totally safe operating environment.
Extremely rigid frame construction maintains positioning for accurate cutting.
PC-based control system with user-friendly operator/machine dialogue makes the EA25 easy to operate.
Self-diagnostic trouble-shooting pinpoints problems early, reducing downtime.
4-post, centrally adjusted, synchronized mechanical stops ensure accurate cutting depth positions, increasing the life of the cutting die and cutting pad while improving the quality of the cut parts.
Die height display panel illustrates the position of the mechanical stops with an accuracy of .004", making die changes easier by recording the cut positions of each die thereby avoiding overcutting mistakes.
9 sets of oil seals in the main hydraulic cylinder eliminate the possibility of oil leaks.
VIDEO
Click Here to Request a Quote or More Information
CNC 3-Axis Automatic Envelope & Paper Die Cutting Hydraulic Press - Specifications
| Model |
EA -25 Fully Automatic |
| Cutting Force |
25 Tons |
| Motor |
Main:3 HP |
| Cutting Head |
24.4" x 24.4" |
| Blank Size |
Max. 23.6" x 23.6" |
| Material Size |
Max. 37.4" x 23.6" |
| Cutting Stroke |
7.1" |
| Open Daylight |
4.5" x 11.6" |
| Die Height |
2.8" - 3.9" |
| Throughput |
Up to 1,400,000 blanks / 8 hours depending on operation |
| Machine Dimension |
178" L x 161" W x 95"H |
| Machine Weight |
11,500 Tons |
EM Envelope Cutting Press
.jpg)
The EM Envelope Cutting Press combines the proven technology of the industry standard Traveling Head Press, and the simple operation and controls of a manual press.
This press commonly uses a four-corner die that cuts the corners off a stack of paper creating an envelope. Front and Rear scrap conveyors assist the operator in keeping a clean work area.
The basic operation of placing a stack of material on the press bed and pushing the start button makes this a simple press to operate.
| Model |
Semi-Automatic
EM-25
|
Semi-Automatic
EM-30
|
| Cutting Force |
25 U.S. Tons |
30 U.S. Tons |
| Open Daylight (head to bed) |
9.6" |
9.6" |
| Open Daylight |
|
|
| Cutting Stroke |
5.1" |
5.1" |
| Motor |
3 HP |
3 HP |
| Machine Bed |
19.7" x 59" |
25.6" x 68.9" |
| Head Size |
23.6" x 24.4" |
25.6" x 28.3" |
Video
Model RH Receding Head / Beam Hydraulic Die Cutting Press
The RH (receding head press) allows a larger format of the four-corner die cutting surface. This press combines the larger format with a magnetic die head, allowing a faster set up compared to the four-corner die with tie rod setup. Using a paper pattern to position the dies, and laser guides for the material, setup is a snap!
Faster set up, front scrap conveyor and rear scrap paper removal, make this press
4 times faster
than traditional Hobbs 4 corner cutting systems.
Video
CUTTING BOARDS & CUTTING BELTS - Check out Our Full Range of Quality Products
|
